ROCKSHOX BOXXER TOTALLY PREDICTABLE
The all-new BoXXer is what happens when the paradigm shifts and the primary focus is improved rider composure. When you isolate and eliminate variance and surprise, precision goes up, fatigue goes down, and speed and traction increase as by-products. Predictability is fundamental. BoXXer gets it. Riding BoXXer proves it.
THREE FUNDAMENTALS OF FASTER
01.COMPOSURE = SPEED.
Nothing amplifies rider performance more than composure. By putting our focus on improving rider posture, vision, and energy preservation, speed comes naturally. We did it by re-designing BoXXer to better isolate impact and vibration—but still allow feel for bike and terrain inputs. For racers to go faster.
02.DESIGN EVERYTHING TO ENABLE THE AIR SPRING.
Damper performance has defined the conversation in mountain biking, but without the best air spring, the best damper isn’t. LinearXL is a whole fork approach to air spring design, reducing the speed-sensitivity of the air spring—delivering predictable position-sensitive control.
03.SETUP SHOULD BE SIMPLE.
The perfect setup is personal. But you shouldn’t have to “puzzle” to find it. The all-new BoXXer streamlines racers into their “window of happiness” with adjusters that visibly indicate settings and make fine-tuning easy. No more counting clicks. No more wasting track time.
PREDICTIBILITY IS LINEAR
LinearXL has a position-sensitive linear curve. That means as you move through the travel, the rate at which the fork increases force never changes—delivering predictability. It’s supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out system for confident end-stroke control. LinearXL’s whole fork approach also accounts for captured air in the lower legs, eliminating inconsistent speed sensitivity.
LinearXL AirAnnex
The AirAnnex on BoXXer’s lower leg increases the lower leg air volume, which reduces the air-spring progressivity and speed-sensitivity inherent to traditional lower leg designs. Transforming what was previously uncontrollable speed-sensitive progression into linear predictability for the racer.
Stanchions that Breathe
Strategically placed breather holes in the stanchions allow for the lower leg air volume to increase as the fork goes through its travel. A small feature that works in a big way to decrease breakaway force and increase fork sensitivity throughout the travel.
Charger 3.2: Speed-Sensitive and Silent
Re-tuned for the unique position-sensitivity of LinearXL, Charger 3.2 delivers speed-sensitive control with fully independent High Speed and Low Speed Compression damping. Because a damper should feel and sound incredible. That sound is silence.
A CHASSIS FOR CHARGING
Our most aggressively precise 38mm chassis, optimized for World Cup DH-winning speed—without the deflection and energy-robbing vibration typical of forks with excessively large stanchions. Put BoXXer where you want it.
Constant Bushing Lubrication: ButterWagonTech
ButterWagonTech™ is a proprietary matrix of divots on BoXXer stanchions that works to carry (or ‘wagon’) fresh layers of our exclusive, high-density Maxima oil to the bushings with every millimeter of travel. Unparalleled in design and function, ButterWagonTech sets a new benchmark for sensitivity—one that’s felt in every corner, every descent, and on every podium. When traction and control are this refined, the results speak for themselves.
ButterCups vibration reduction
Even the strongest and fastest athletes in the world experience fatigue and arm pump. ButterCups™ work to isolate the air spring and damper shafts from chatter, to reduce high-frequency vibration by up to 20%. Scientifically proven to keep racers fresher.
Perfect Chassis Alignment
Crown-height gradients are marked on the new BoXXer to give a simple visual guide that simplifies setup. Proper chassis torque and sequencing are also included to ensure perfect alignment and maximum sensitivity. No ruler or brain pain required.
Exclusive Seals for Sensitivity
Most wiper seals deflect into the upper tube when the lower leg pressurizers, creating more friction. To solve for this, we worked with SKF to develop an exclusive design that cleans the dirt without grabbing the upper tube, increasing sensitivity deep in the travel.
BOXXER ULTIMATE
Born from racing, BoXXer promises one thing above all—composure. By eliminating chaos before it reaches the rider, every run delivers predictable speed, traction, and control. The all-new LinearXL air spring provides a coil-like ride—supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out bumper for confident end-stroke control—giving you unwavering consistency and predictability. Found only in our Ultimate forks, ButterWagonTech ensures a constant supply of oil to the bushings, reducing friction and maintaining smooth performance throughout the entire service interval. Intuitive HSC/LSC controls on the Charger 3.2 damper with ButterCups technology make setup fast, understandable, and easy to communicate. You’re so composed you don’t realize you’re going faster. But the clock says it all.
Features
- NEW LinearXL air spring delivers a consistent and predictable ride feel backed by a jounce bottom-out bumper for end-stroke control
- NEW ButterWagonTech ensures a constant supply of oil to the bushings, reducing friction and maintaining smooth performance throughout the entire service interval
- NEW Charger 3.2 damper with new Rebound/Compression tunes that match LinearXL air spring, achieves virtually silent performance, keeping riders focused on the trail
- NEW Control bezel with numbered Compression adjuster for intuitive adjustments—start at “0” and easily add or decrease damping
- NEW Graphics package—minimalist design, maximum impact
- ButterCups technology block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue
- Low-grab SKF wiper seals deliver long-lasting fork performance and a smoother ride
- Maxima 920 blended 15w reduces overall fork friction
- Bolt-on fender compatibility with front and rear coverage (BoXXer Bolt-On Fender sold separately)
- Available in Electric Red or Ultimate High Gloss Black Signature colorways
BOXXER SELECT
The new BoXXer technology trusted by the world’s fastest racers is now available in an approachable trim without compromising performance. The all-new LinearXL air spring provides a coil-like ride—supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out bumper for confident end-stroke control—giving you unwavering consistency on the longest tracks. New Rebound and Compression tunes on the Delta RC damper make it equally capable for racers and park rats alike.
Features
- NEW LinearXL air spring delivers a consistent and predictable ride feel backed by a jounce bottom-out bumper for end-stroke control
- Charger 3 RC damper with easy-to-adjust Compression and independent Rebound features intuitive controls and virtually silent performance, keeping riders focused on the trail
- NEW Graphics package—minimalist design, maximum impact
- Low-grab SKF wiper seals deliver long-lasting fork performance and a smoother ride
- Maxima 920 blended 15w reduces overall fork friction
- Bolt-on fender compatibility with front and rear coverage (BoXXer Bolt-On Fender sold separately)
ROCKSHOX VIVID COIL GRAVITY EVOLVED
From bike park laps to enduro stages and the roughest downhill tracks, racers need predictability from their suspension. That’s the essence of coil, and it’s what inspired our approach to LinearXL in the all-new BoXXer. By embracing the inherent linearity of a coil spring and pairing it with Adjustable Bottom-Out (ABO), Vivid Coil gives riders precise, position-sensitive control—delivering consistent, predictable performance across every millimeter of travel. It isolates and eliminates unwanted variance to boost rider composure, reduce fatigue, and unlock greater speed and traction.
Predictability isn’t just a feature—it’s foundational.
Vivid Coil’s all-new RCT2 damper is designed to work as a system with your fork and Charger 3.2 damper, delivering matched mid-stroke support and seamless performance. With a redesigned base valve that cuts IFP forces by 40%, it’s the most supple shock on the market—offering unbeatable traction without sacrificing support.
Soften the Blow
Go big, then go home. Vivid Coil’s Adjustable Bottom Out (ABO) handles the hardest compressions to keep you in control. Adjust the compression damping in the last 20% of shock travel with a convenient dial that offers five settings to customize the cushioning.
VIVID COIL ULTIMATE AND ULTIMATE DH
There’s a reason everyone loves coil—the feel is unmistakable—supple off the top, supportive through the mid-stroke, and backed by Adjustable Bottom Out (ABO) for confident end-stroke control—giving you unwavering consistency and predictability. Engineered to work as a system with your fork and Charger 3.2 damper, the RCT2 (RC2 at DH version) damper’s new main piston compression tunes deliver confident mid-stroke support, while intuitive HSC/LSC adjusters make setup fast, clear, and easy to communicate. Distilling decades of coil dominance into a shock built for today’s enduro, E-MTB, and downhill bikes, Vivid Coil Ultimate carries the unmistakable heritage of coil into a new era of performance.
Features
- NEW RCT2 (RC2 at DH version) damper providing a wide, usable range of Low Speed Compression (LSC) and High Speed Compression (HSC) adjustments without any cross-talk
- NEW Numbered Compression adjuster for intuitive adjustments—start at “0” and easily add or decrease damping
- NEW Base valve with 40% reduction in IFP forces, making it the most supple shock on the market while maintaining perfect traction
- NEW Main piston compression tunes matched in performance to the Charger 3.2 damper, focused on providing mid-stroke support
- Adjustable Bottom Out (ABO) offers a convenient dial with five different compression settings to customize the cushioning you experience in the last 20% of travel
- Removable Rebound knob doubles as HSC and ABO adjuster
- 20 clicks of Rebound adjustment, providing uniform rebound curves paired with a broad adjustment range, provide a consistent ride feel for a wide spectrum of rider weights
- 8x30 Bearing Adapter available for all standard eyelets, configured as hardware (upcharge applies)
VIVID COIL SELECT +
There’s a reason everyone loves coil—the feel is unmistakable—supple off the top, supportive through the mid-stroke, and backed by Adjustable Bottom Out (ABO) for confident end-stroke control—giving you unwavering consistency and predictability. Engineered to work as a system with your fork and Charger 3.2 damper, the RCT damper’s new main piston compression tunes provide mid-stroke support, while an intuitive LSC adjuster make setup fast, clear, and easy to communicate. Distilling decades of coil dominance into a shock built for today’s enduro, E-MTB, and downhill bikes, Vivid Coil Select+ carries the unmistakable heritage of coil into a new era of performance.
Features
- NEW RCT damper providing a wide, usable range of Low Speed Compression (LSC) adjustment
- NEW Numbered Compression adjuster for intuitive adjustments—start at “0” and easily add or decrease damping
- NEW Base valve with 40% reduction in IFP forces, making it the most supple shock on the market while maintaining perfect traction
- NEW Main piston compression tunes matched in performance to the Charger 3.2 damper, focused on providing mid-stroke support
- Adjustable Bottom Out (ABO) offers a convenient dial with five different compression settings to customize the cushioning you experience in the last 20% of travel
- Removable Rebound knob doubles as HSC and ABO adjuster
- 20 clicks of Rebound adjustment providing uniform rebound curves paired with a broad adjustment range provide a consistent ride feel for a wide spectrum of rider weights
- 8x30 Bearing Adapter available for all standard eyelets, configured as hardware (upcharge applies)
VIVID COIL SELECT
There’s a reason everyone loves coil—the feel is unmistakable—supple off the top, supportive through the mid-stroke, and backed by a large bottom-out bumper—giving you unwavering consistency and predictability. Engineered to work as a system with your RockShox fork damper, the RT damper’s new main piston compression tunes provide mid-stroke support, while an intuitive threshold lever makes climbing no big deal. Distilling decades of coil dominance into a shock built for today’s enduro, E-MTB, and downhill bikes, Vivid Coil Select carries the unmistakable heritage of coil into a new era of performance.
Features
- NEW RT damper providing a threshold lever for climbing efficiency
- NEW Base valve with 40% reduction in IFP forces, making it the most supple shock on the market while maintaining perfect traction
- NEW Main piston compression tunes matched in performance to the Charger 3.2 damper, focused on providing mid-stroke support
- 20 clicks of Rebound adjustment providing uniform rebound curves paired with a broad adjustment range provide a consistent ride feel for a wide spectrum of rider weights
- 8x30 Bearing Adapter available for all standard eyelets, configured as hardware (upcharge applies)
VIVID COIL
There’s a reason everyone loves coil—the feel is unmistakable—supple off the top, supportive through the mid-stroke, and backed by a large bottom-out bumper—giving you unwavering consistency and predictability. Engineered to work as a system with your RockShox fork damper, the R damper’s new main piston compression tunes provide mid-stroke support. Distilling decades of coil dominance into a shock built for today’s enduro, E-MTB, and downhill bikes, Vivid Coil carries the unmistakable heritage of coil into a new era of performance.
Features
- NEW R damper providing an easy-to-use Rebound adjuster
- NEW Base valve with 40% reduction in IFP forces, making it the most supple shock on the market while maintaining perfect traction
- NEW Main piston compression tunes matched in performance to the Charger 3.2 damper, focused on providing mid-stroke support
- 20 clicks of Rebound adjustment providing uniform rebound curves paired with a broad adjustment range provide a consistent ride feel for a wide spectrum of rider weights
- 8x30 Bearing Adapter available for all standard eyelets, configured as hardware (upcharge applies)
